Hauppauge 00351 Fiche technique télécharger pdf (Page 43)

WinTV Reference Manual

My external input connected by S-Video is black and white

Symptoms

When you connect an external source such as a games console, VCR or cable/satellite set top

box via S-Video, the picture is in black and white.

Cause

- Simple SCART to S-VIDEO adapters (unpowered) do not convert the signal to S-Video at all

as they just rewire the pins

- VHS VCRs rarely output S-Video over SCART

- Most Sky boxes except for Sky+ don't output S-Video

- Many other set top boxes only output Composite and RGB, no S-Video

Resolution

To get a color image from equipment with just Composite and RGB on the SCART connector

you will have to connect up via Composite.

If you want to get higher quality than Composite, then it will be necessary to use a mains

powered RGB to S-Video converter. If it doesn't require power then it isn't a converter - it is

just a simple adapter and will not do the job.

Games console slow response

Symptoms

When you connect a games console to the WinTV card, you find that the action on screen

responds to button presses slowly - up to 2 seconds after you press a button on the control-

ler.

Cause

The cards above use hardware MPEG encoders, and the encoders are used for live TV too.

The MPEG-encoded stream must be decoded before it can be displayed, and this introduces

a delay.

Resolution

Enable Live Preview mode.

WinTV PVR-150/500

1. Click on the Windows Start button

2. Click on Run

3. Type Regedit in the box and click OK

4. Browse to HKEY_LOCAL_MACHINE\ SOFTWARE\Hauppauge\hcwTVWnd

5. Set LivePreview to 1

WinTV PVR-150/HVR-1300

1. Click on the Windows Start button

2. Click on Run

3. Type Regedit in the box and click OK

4. Browse to HKEY_LOCAL_MACHINE\ SOFTWARE\Hauppauge\hcwTVWnd\Roslyn

5. Set LivePreview to 1

Vista switches to Basic UI when starting WinTV

Symptoms

When you start WinTV on Vista, it switches from the Aero UI to Basic.

Cause

Aero cannot be enabled at the same time as Video Overlay.

Resolution

Set WinTV2000 to use the VMR renderer rather than Overlay:

1. Click on the Windows Start button

2. Go to All Programs, Hauppauge WinTV

3. Open Primary

4. Select Allow VMR

1 2 ... 38 39 40 41 42 43 44 45 46 47 48

Commentaires sur ces manuels

Pas de commentaire

Hauppauge 00351 Fiche technique Page 43

Commentaires sur ces manuels

Produits connexes et manuels pour Syntoniseurs de télévision par ordinateur Hauppauge 00351